Klingerit and Tesnit plates
Klingerit | Flexible at high temperatures and adaptable to vibrations and mechanical loads.
Klingerit is a high-quality gasket material made from organic and mineral fibers combined with a special rubber. Its most important characteristic is its flexibility at high temperatures and its ability to adapt to changes in the material it comes into contact with, as well as vibrations and other mechanical loads. Klingerit is easy to process, cut, and bond, and gaskets made from klingerit have a long service life. Due to these characteristics, klingerit is one of the most widely used gasket and insulation materials. Considering the cost and service life of gaskets made from klingerit, it is very cost-effective.
Available in:
Dimensions: klingerit plates 1500 x 1500 mm Thicknesses: 0.5 – 4 mm / tolerances for thicknesses from 0.5 to 0.8 mm are 0.1, and for the rest +/- 10% One side of the plate is antistatic.
TG / F-EC (AF 152 EC)
A non-asbestos gasket sheet made of organic fibers bonded with NBR binder. Used in industry for lower to medium temperatures and pressures.
TG/F (AF-152)
Asbestos-free gasket sheet made of organic fibers bonded with NBR binder. Used in industry at lower to medium temperatures and pressures.
TG/S (AF 300 B)
High-quality non-asbestos gasket sheet made from a blend of mineral and reinforced fibers with a special nitrile binder. Suitable for sealing hot and cold water, steam, oil, and gas. Available with a wire mesh insert.
TG/P (AF-OIL)
Asbestos-free gasket sheet made of a mixture of fibers with special thermal resistance and nitrile binder. It has excellent tensile strength under high temperatures and pressures. Suitable for sealing oils, fuels, lubricants, alcohols, gases, hydrocarbons, steam, water, cooling fluids, and most diluted acids and alkalis. Available in a version with a wire mesh insert
TG/C (AF-F)
Reinforced non-asbestos gasket sheet made from carbon fibers bonded with high-quality nitrile rubber. Particularly suitable for use under alkaline conditions, with good resistance to steam. It has excellent tensile strength and is suitable for applications involving oils, fuels, and cooling fluids
TG/M (AF-300 B2 GZS)
is a non-asbestos gasket sheet made of a mixture of mineral and aramid fibers connected by a special NBR binder. It is used for sealing hot and cold water, oils, cooling fluids, fuels, steam, and gas. It is reinforced with a wire insert and graphite-coated on both sides