Standard Series

The standard series is intended for general terms of use for workloads ranging from 16, 21, 26, 32, 40 and 52 kg/cm to the bar width. In accordance with workloads, the offer includes a core band composed of 2, 3, 4 or 5 polyester-polyamic (EP) fabric of high tensile strength. Thanks to its excellent and flexible flexibility, it has the ability to adapt to local deformations, working punches and vertical crosses. External rubber layers protect the strip core from environmental impacts, wear, tear, tearing, etc., even in the presence of oil, acid or heat in transported materials.

It corresponds to the basic domestic and foreign standards and quality and efficiency of various users: cement plants, brickworks, foundries, Kosar, chemical industry, mines, quarry, glass, sugar plants, solants, silos, Waste recycling etc.

Available in standard widths:
400, 500, 600, 650, 800, 1000, 1200, 1400, 1600, 1800 and 2000 mm in standard winding lengths of 200 m '.

According to the user's request, we also deliver them in the longer than the standard coil.

Possibility of delivery:
• In the coils, the length of the strap, as required by the user
• In the required lengths at the end of the strip prepared for gluing
• Merged in the requested dimension, with warranty on the date of

The offer is antiabrasive • oil resistant • Thermoresistant • Rebrained, moulded, with limiters • Elevation (with cofices) • Flat strips • The infinitely connected bands.

Type N – NORMAL

Conveyor belt with outer layers of rubber mixture resistant to abrasive, abrading, cutting and aging due to external influences. Operating temperature from – 35 ° C to + 80 °c.

They are intended for transport: lime, cement, concrete, coke, clinker, stone coal, inert materials, minerals, glass shards, salts, sand, etc., in medium-heavy or heavy pieces, depending on the number of EP-Platan in the bar.

Depending on the protection of the rubber band they are divided as follows:

DIN-22102-Y for transporting medium abrasive material and sharp edges material in smaller pieces
DIN-22102 – X for the transport of abrasive material and sharp edges material in large pieces
DIN-22102 – W for transporting very abrasive, granal and sipical material
DIN 22104 – E If the antistatic performance is required.

OIL BELT

Conveyor belt with outer layer based on special elastomers (DIN 22102-G), very resistant in contact with oils and
Fats regardless of their origins. It has good resistance to aromatic and alifatic solvent and with the presence of abrasive
The effects of the transported material.
Operating temperature from – 35 ° C to + 80 °c. has wide use in transport
Oil seeds, petroleum coke, urban waste, rich coal,
Fertilizers, lubricating metal pieces etc.

Temperoil

Convel strips with outer layer of polyvalent mixers (din 22102-G, din 22102-T), resistant in contact with hot materials in the presence of oil and grease. It is required in the conditions of intensified abrasive activity of the environment and the mechanical activity of transported materials heated to temperatures up to 110 °c (short lasting up to 130 °c).

Malleable

A strip with a core of 2, 3 or 4 linen with external protective layer of temperature resistant and anti-abrasive mixture (DIN 22102-T)
Suitable for transporting hot materials (up to 110 °c, and short lasting up to 130 °c). It is used for the transport of Coke, lime,
The clinker, etc. The number of Platans in the bar depends on the size of the conveyed pieces.

Ardent BELT

Conveyor belt with good antiabrasive characteristics, elastomer-based external protective layer (DIN 22102-T) resistant to temperatures up to 130 °c, and occasionally up to 150°c.

It is intended for transport of hot and chemically aggressive materials in medium and small pieces, such as sulphur, superphosphate, baked minerals, coke, products of the Kullman process etc.

Superardent

Conveyors with a core of 2, 3 or 4 epulogical, outer layer of thermoresistant mixture based on special elastomers (DIN 22102-T) resistant to temperatures up to 150 °c, and occasionally up to 200 °c or more.

It is used for transport of fine, if necessary and acidmaterial, for transport speeds adapted to transported material.

White ribbons for the food industry – but BELT

Transport strips with a core of 2 or 3 (EP) canvas with white rubber protective layer (DIN 22102). Suitable for use on transporters in food industry. Resistant to abrasion up to 170 mm ³. It is used in a temperature range of-20 °c to + 80 °c. It is manufactured in widths up to 1800 mm.

Rubber belts for sliding surfaces – BELT FLAT

Rubber conveyor belt for use on sliding surfaces transporters. It has good resistance to abrasion and atmospheric influences and a low coefficient of friction of the lower (sliding) surface.  It guarantees very precise functioning and is used for transporting ceramics, baked bricks, in the marble industry, at storage facilities, etc. Operating temperature: from – 20 °c to + 80 °c.

Tubular Conveyor – "ENDLESS"

The endless series is a special type of tape in the form of an infinite ring of calibrated thickness, with a top layer protected by a special coating. They are produced in widths up to 2000 mm, maximum length of 24 m. They are characterized by peaceful work without vibration and deviations, for which they are suitable for the use of weighing, dosing, baging, etc.

The offer includes:
Type E-infinite strip for abrasive, sharp and moist materials at temperatures up to + 100 °c.
Type G-Infinity tape for oil or fatty materials, vegetable or mineral fats, with a temperature of up to 100 °c.
Type T-infinite strip for medium abrasive, hot materials with temperatures up to 130 °c, and occasionally up to 150°c.

Bands with profiled surface – APE BELT

Conveyor belt for storage and distribution of products in bags, packages, boxes, crates, etc.
It is characterized by the upper bearing layer of moulded surface and lower layer with low friction coefficient and the possibility of
Movement on rollers and flat surfaces (per Lima).

Flat belts-Tapes-CNT

The flat belts (strips), depending on the need, are composed of 2 to 7 plats without surface rubber layers. It is used for the internal transport of semi-products with the possibility of movement by rollers or Lima and as the elevators with bulk loads: cereals, screw goods, pasta etc.

have limited use in the food industry (D.M. 21/3/73 group V).

As a tape in an oil-resistant variant, it is used for transporting sheet metal and mechanical elements in the presence of fat, skin, and can be used as a sorting desk.

Elevation Belts – ELEV BELT

The offer includes high quality elevation strips with a core of 3, 4 or 5 polyester-polyamix (EP) Platans.
They are suitable for use in combination with metal cofics, if necessary, and very short interseparation.
The coals are fixating on the tape with special metal screws and elastic rings and other similar buckles.

Elevation belts are manufactured according to customer order:
The holes are processed previously, and the compound can be covered if necessary. Due to the characteristics of certain materials to produce static electricity, which may be the cause of the explosion, the strips used in silos correspond to the standard of the antistatic UNI 8007.

Strips with ribbed print – CHEVRON

Conveyor belt with ribbed on the upper surface of the strap, in standard height of ribs 15 mm set in shape
The V's, in the opposite direction of the movement of the tape. It is able to retain the transported material on the slopes of 20 ° to 40 °. Outdoor
Rubber layer is antiabrasive, resistant to tearing. The strap is suitable for hard weather work.

Strips with lateral and lateral delimiters – gumibord

To prevent material dissipation during transport, whether on trans-porters balanced (from 0 to 90 °) or variable inclination, the most optimal solution is the conveyor belts with lateral ("harmonica") and lateral ("rib") delimiters. The offer includes strips of standard width from 400 to 2000 mm, in lengths according to customer's request. To correctly dimensioned the rubber band, you need to specify these parameters:

Parameters:
• Tape width and tip of the Ribbon basics
• The height of the waver delimiters (harmonics) and their
Position on the bar
• Type and number of lateral ribs on the bar.

Harmonica side delimiters

The side delimiters "harmonica" are made in a waver shape with internal reinforcement that gives stability to the entire bar. They can be placed in two or more rows, depending on the width of the conveyor. For use on variable slopes, the lateral delimiters of the higher transverse rigidity are recommended to 70 to 120 mm from the edge of the strap, while on constant slopes are placed on the edges.

Lateral delimiters "ribs"

With lateral delimiters on the bar, transverse delimiters ("ribs") can be combined, which proportionally correspond to the height of the
Accordions (see attached table 1.17). Depending on the capacity required, the slope of the conveyor and the belt intensity,
Scheduled from 2 to 5 pieces by the length of the tape. The offer includes 3 types of TRANSVERCT ribs: Tt; Ts Tz.

Series Extra

Series EXTRA represents extremely reliable and quality conveys for very demanding conditions
Application.

It is manufactured in two variants:
Extra-EP and extra-D.

For the sake of top features, it is used in heavy industry, steelworks, chemical plants, thermal power plants, cement mills, mines etc.

  Catalog 

In very demanding working conditions, with the need for strips of small weight with limited elastic and durable deformations,
The EXTRA-D series is recommended. The top performance of the tape was achieved using the Aramid (D) backbone
Fibres, which are characterized by low longitudinal deformations and high tensile strength. It is used as a substitute

For the appropriate types of ST-bands (strips with the core of steel ropes), of which it is much easier. is manufactured according to
Customer request ranging from 800 to 2500 day/cm.

Energ BELT

This series is specially designed for very demanding working conditions, especially in places where the blows during exploitation can cause the strips to be tearing. In these strips, the inner core of the tape consists of 2, 3 or 4 EP-canvases with reinforced cartridge on the base of elastic rubber, for the equal redistribution of load between the canvases. It is used primarily in plants with an increased risk of cutting and chopping strips, such as quarries, metal and glass recycling facilities, etc.

In addition, they are used on machines designed for polishing in the wood industry, where the tape moves at a relatively low speed on the "table" instead of rollers.

ST Strips of steel ropes

This group includes conveyed belts produced by DIN 22131, with Galva-with steel cables (ropes) coated with high quality rubber mixture. This tape design allows for a balanced distribution of cargo between cables; It is characterized by a good adjustment to local deformations and durability and strength of the joints. Steel ropes are from contact with transported material, corrosion, mechanical and chemical damage, heat, environmental impact, etc. Protected with high-quality rubber layer. As required by the user, the upper protective layer of the strap can be produced with additional synthetic or metal protection against the suspension or cutting of the tape caused by the conveyed material.

The extension of these strips is limited to 0.2% of the working length under load up to 500 kg/cm or higher, enabling use on large rasareas (10, 12 or more km) and altitude differences of several hundred meters.  For their traits they are used in mines, quarries, plants where there is danger of explosions, etc.

  Catalog 

*By submitting the above form, you agree that your data is being stored in a temporary base and used for the purposes of improving sales